Homesteader

Single-Tub Cider & Wine Press

The "Homesteader" is a single-tub cider or wine press with the same basic frame and press screw assembly as our double-tub model. It has been specifically designed as an all-puropose fruit press which is capable of grinding and efficiently squeezing apples, grapes and other fruits and vegetables.

The "Apple Eater" grinding attachment is conveniently mounted on the back of the press - allowing the "pulped" fruit to fall directly into the tub for squeezing (however, this attachment can be mounted independent of the press, allowing both press and grinding operations to take place at the same time!)

Technical Specifications:

FRAME: The frame is constructed of rugged laminated hardwood. All joints are dadoed and cross-bolted for full structural rigidity.

WOOD FINISH: ALL PRESSES COME UNFINISHED! You will need to protect it with varnish, lacquer, Poxy Coating or EZ-DO Polyurethane Gel.

SCREW: The Acme-threaded press screw is 1 1/2" in diameter, 22" long, and passes through a heavy cast iron crossarm. Pressure is applied to a rienforced press-disc which fits inside the tub. Attached to the bottom of the screw is a cast iron foot which distributes the pressure to the press-disc. It is suggested that you apply a small amount of lubricant to the screw as well as the inside the pressure foot. See our Petro-Gel Lubricant.

TUBS: The hardwood tub has beveled staves for easy cleaning, it is 12" high, 13 1/2" in diameter, and is banded with heavy steel hoops. The capacity is equivalent to a box of "pulped" apples. One juice rack included with each Homesteader.

GRINDER: The 5 1/2" diameter terpolymer of ABS cylinder has 8 serrated stainless steel knives. The specially designed grinding box is all cast iron. Operation is made smooth, fast and easy by the use of a 18 lb. cast iron flywheel attached to the grinding shaft.

FREE NAMEPLATE:

You can obtain a Brass Nameplate (as seen on the Press Add-On page) for FREE when ordering this complete press! Complete the form below. (Suggestion: Name on line 1 and date on line 2) Be advised that 20 characters per line including spaces will give you the best look with our engraving.